Review of the Fanxiang S880 SSD

Review of the Fanxiang S880 SSD

Fanxiang is one of the latest challengers in the budget PCIe 4.fanxiang ssd 0 SSD space. Their S880 features a sleek, minimalist appearance that is sure to inspire confidence. The drive is available in a 2TB model and easily integrates into most modern motherboards with its M.2 2280 form factor. The device utilizes a well-known Innogrit IG5236 controller and Yangtze memory 3D TLC NAND.

Performance results come in at an expected level for the price point.fanxiang ssd Sequential reads exceed expectations but writes are below the claimed peak speeds, as is to be expected for a DRAM-less drive with no overprovisioning. The real-world mix profile also shows that performance drops off when the drive is full, a common trait among value drives that use cheap NAND.

Using HD Tune, a 5GB file is written to the drive and transfer data is displayed graphically for both the read and write speeds.fanxiang ssd The minimum, maximum and average speeds are determined along with the access time and burst rate.

These results aren’t bad at all for a budget drive, but there are some concerns that should be noted.fanxiang ssd The write latency increases over time while the access times remain relatively constant. This is likely due to the fact that the SSD is filling up and the writes are causing a bottleneck. The random write performance also suffers from some erratic results.

The S880 is available on Amazon for $120, which is very competitive with other similar SSDs in the same price range.fanxiang ssd The drive offers good performance and generous storage capacity, which makes it a solid option for budget-minded PC builders.

The packaging is fairly minimal and includes a heatsink, thermal pads, a screwdriver, and M.2 mounting screws. While the packaging isn’t sealed in an anti-static bag, it does provide adequate protection during shipping and ensures that the drive arrives in pristine condition.

Tags:china ssd factory | colorful ssd | foresee ssd